Difference between revisions of "Vickers F.T.P. Fire Control Instruments"

From The Dreadnought Project
Jump to: navigation, search
(Created page with 'After an initial effort with some dial instruments Vickers manufactured a variety of Step-by-Step Fire Control Instruments i…')
 
(Mark III*)
 
(10 intermediate revisions by 2 users not shown)
Line 1: Line 1:
After an initial effort with some [[Vickers Dial Fire Control Instruments|dial instruments]] [[Vickers]] manufactured a variety of [[Step-by-Step]] [[Fire Control Instrument]]s incorporating the [[F.T.P.|"follow-the-pointer"]] principle.   
+
[[File:HFCI1914Plate15.jpg|thumb|480px|'''Vickers F.T.P. Instruments, c1914'''{{HFCI1914|Plate 15}}<br>The range receiver in the upper left is a Mark III. ]]
 +
After initial success supplying [[Vickers Dial Fire Control Instruments|dial instruments]], [[Vickers]] manufactured a variety of [[Step-by-Step]] [[Fire Control Instrument]]s incorporating the [[F.T.P.|"follow-the-pointer"]] principle.  They were first used in ''Boadicea'', around 1909, and regained Vickers the lead it had lost in 1906 to Barr and Stroud in supplying sightsetting instruments.
  
==F.T.P. Instruments==
+
==Mark I==
 +
These were electrically similar to the [[Vickers Dial Fire Control Instruments|dial instruments]] Vickers had previously provided. A chopper handle built into the switch at the transmitter lifted the brushes off the rotor when the indication was not being driven.{{HFCI1914|p. 18}}  They were only used in Boadicea,{{HFCI1914|p. 72}} although one source{{HFCI1909|p. 57}} indicates they were also used in ''Bellona''.
  
===Mark I Instruments===
+
{|border=1
:[[Vickers Mark I Fire Control Instruments|Main article]]
+
!colspan=2| Mark I Pattern Numbers<br>for 4-inch guns{{HFCI1914|p. 21}}
TODO:
+
|-
* HFCI Plate 11 Mark I FTP diagram
+
!Device||Pattern No.
* HFCI Plate 12 Mark I FTP tx
+
|-
 +
|Range Transmitter||2643
 +
|-
 +
|Range Receiver||2645
 +
|-
 +
|Deflection Transmitter||2644
 +
|-
 +
|Deflection Receiver||2646
 +
|}
  
===Mark II Instruments===
+
==Mark II==
:[[Vickers Mark II Fire Control Instruments|Main article]]
+
These were considerably different from the Mark I, internally, by having a brushless design.{{HFCI1914|p. 18}}  The range transmitter did not transmit pulses equating to any given range increment, but one rotation of the handle moved the pointer a quarter degree.  In deflection, one revolution yielded 1.5 knots of deflection.{{HFCI1914|p. 19}}
TODO:
+
* HFCI Plate 13 Mark II FTP diagram
+
* HFCI Plate 14 Mark II FTP tx+rx
+
  
===Mark III Instruments===
+
{|border=1 style="float: right;"
:[[VickersFire Control Instruments Mark III|main article]]
+
!colspan=3| Mark II Pattern Numbers<br>for given guns{{HFCI1914|p. 21}}
TODO:
+
|-
* HFCI Plate 15 Mark III FTP
+
!Device||4-in guns||6-in guns
* HFCI Plate 16 Mark III FTP details
+
|-
 +
|Range Transmitter||2651||2647
 +
|-
 +
|Range Receiver||2652||2648
 +
|-
 +
|Deflection Transmitter||2653||2649
 +
|-
 +
|Deflection Receiver||2654||2650
 +
|}
  
These differed from Mark II by having the receiver not be part of the sight, rendering it cheaper and simpler in construction, and the transmitter did not have a sight dial as a tell-tale; simply a drum transmitter and repeat receiver.<ref>''Annual Report of the Torpedo School, 1909'', p. 148.</ref>
+
==Mark III==
 +
These were similar to the Mark II, electrically, but differed by having the receiver not be part of the sight, rendering it cheaper and simpler in construction.  Also, the transmitter did not have a sight dial as a tell-tale &mdash; simply a drum transmitter and repeat receiver.{{ARTS1909|p. 148}}
  
===Mark III* Instruments===
+
Although the Mark III devices differed by the sights they were fitted to, when delivered on a base plate alone, the Pattern numbers were as follows.
:[[Vickers Mark III* Fire Control Instruments|Main article]]
+
  
The transmitters of the Mark III* devices could use [[Cross-connecting Gear]] by virtue of their wheel gearing.<ref>''Annual Report of the Torpedo School, 1909'', p. 148.</ref>
+
{|border=1 style="float: right;"
 +
!colspan=3| Mark III Pattern Numbers<br>without sight dial{{HFCI1914|p. 21}}
 +
|-
 +
!Device||Pattern No.
 +
|-
 +
|Range Transmitter||2660
 +
|-
 +
|Range Receiver<br>Range Repeat Receiver||2662
 +
|-
 +
|Deflection Transmitter||2661
 +
|-
 +
|Deflection Receiver<br>Deflection Repeat Receiver||2679
 +
|}
  
===Mark IV* Instruments===
+
==Mark III*==
:[[Vickers Mark IV* Fire Control Instruments|Main article]]
+
[[File:HFCI1914Plate10.jpg|thumb|300px|'''Vickers Cross-connecting gear'''{{HFCI1914|Plate 10}} ]]
 +
These transmitters (which worked with Mark III receivers) could use [[Cross-Connecting Gear]] by virtue of their wheel gearing, permitting them to drive two or more transmitters by the action of one man at the mechanical transmitter box.{{ARTS1909|p. 148}}
 +
 
 +
The range transmitter was Pattern 2690 and the deflection transmitter Pattern 2691.{{HFCI1914|p. 21}}
 +
 
 +
[[File:ARTS1910Plate60.jpg|thumb|300px|'''Vickers correctional gear'''{{ARTS1910|Plate 60}} ]]
 +
Some installations incorporated a mechanical additive correctional gear that permitted spotting corrections or other biases to be summed into the transmitted signal by a separate handle and indicator.  These devices bore a similarity to correctors in the cross connecting gear but had a more sensible clock-face which showed "Up" adjustments as clockwise.{{ARTS1910|p. 149}}
 +
 
 +
==Mark IV*==
 +
These transmitters  (which worked with Mark III receivers) were being introduced around 1914 to be first tried in the [[Queen Elizabeth Class Battleship (1913)|''Queen Elizabeth'' class]] and featured an improved cross-connecting gear arrangement for the transmitter.{{HFCI1914|p. 20}}
  
 
==See Also==
 
==See Also==
Line 40: Line 76:
 
==Bibliography==
 
==Bibliography==
 
{{refbegin}}
 
{{refbegin}}
*{{BibUKARTS1903}}
+
*{{ARTS1903}}
*{{BibUKARTS1904}}
+
*{{ARTS1904}}
*{{BibUKARTS1906}}
+
*{{ARTS1906}}
*{{BibUKTorpedoDrillBook1905}}
+
*{{TorpDB1905}}
*{{BibUKTorpedoDrillBook1908}}
+
*{{TorpDB1908}}
*{{BibUKTorpedoDrillBook1912}}
+
*{{TorpDB1912}}
*{{BibUKTorpedoDrillBook1914}}  
+
*{{TorpDB1914}}  
*{{BibUKHandbookFireControlInstruments1909}}
+
*{{HFCI1909}}
*{{BibUKHandbookFireControlInstruments1914}}  
+
*{{HFCI1914}}
 
{{refend}}
 
{{refend}}
  
 
[[Category:Fire Control]]
 
[[Category:Fire Control]]
 
[[Category:Shipboard Equipment]]
 
[[Category:Shipboard Equipment]]

Latest revision as of 15:22, 28 October 2012

Vickers F.T.P. Instruments, c1914[1]
The range receiver in the upper left is a Mark III.

After initial success supplying dial instruments, Vickers manufactured a variety of Step-by-Step Fire Control Instruments incorporating the "follow-the-pointer" principle. They were first used in Boadicea, around 1909, and regained Vickers the lead it had lost in 1906 to Barr and Stroud in supplying sightsetting instruments.

Mark I

These were electrically similar to the dial instruments Vickers had previously provided. A chopper handle built into the switch at the transmitter lifted the brushes off the rotor when the indication was not being driven.[2] They were only used in Boadicea,[3] although one source[4] indicates they were also used in Bellona.

Mark I Pattern Numbers
for 4-inch guns[5]
Device Pattern No.
Range Transmitter 2643
Range Receiver 2645
Deflection Transmitter 2644
Deflection Receiver 2646

Mark II

These were considerably different from the Mark I, internally, by having a brushless design.[6] The range transmitter did not transmit pulses equating to any given range increment, but one rotation of the handle moved the pointer a quarter degree. In deflection, one revolution yielded 1.5 knots of deflection.[7]

Mark II Pattern Numbers
for given guns[8]
Device 4-in guns 6-in guns
Range Transmitter 2651 2647
Range Receiver 2652 2648
Deflection Transmitter 2653 2649
Deflection Receiver 2654 2650

Mark III

These were similar to the Mark II, electrically, but differed by having the receiver not be part of the sight, rendering it cheaper and simpler in construction. Also, the transmitter did not have a sight dial as a tell-tale — simply a drum transmitter and repeat receiver.[9]

Although the Mark III devices differed by the sights they were fitted to, when delivered on a base plate alone, the Pattern numbers were as follows.

Mark III Pattern Numbers
without sight dial[10]
Device Pattern No.
Range Transmitter 2660
Range Receiver
Range Repeat Receiver
2662
Deflection Transmitter 2661
Deflection Receiver
Deflection Repeat Receiver
2679

Mark III*

Vickers Cross-connecting gear[11]

These transmitters (which worked with Mark III receivers) could use Cross-Connecting Gear by virtue of their wheel gearing, permitting them to drive two or more transmitters by the action of one man at the mechanical transmitter box.[12]

The range transmitter was Pattern 2690 and the deflection transmitter Pattern 2691.[13]

Vickers correctional gear[14]

Some installations incorporated a mechanical additive correctional gear that permitted spotting corrections or other biases to be summed into the transmitted signal by a separate handle and indicator. These devices bore a similarity to correctors in the cross connecting gear but had a more sensible clock-face which showed "Up" adjustments as clockwise.[15]

Mark IV*

These transmitters (which worked with Mark III receivers) were being introduced around 1914 to be first tried in the Queen Elizabeth class and featured an improved cross-connecting gear arrangement for the transmitter.[16]

See Also

Footnotes

  1. Handbook for Fire Control Instruments, 1914. Plate 15.
  2. Handbook for Fire Control Instruments, 1914. p. 18.
  3. Handbook for Fire Control Instruments, 1914. p. 72.
  4. Handbook for Fire Control Instruments, 1909. p. 57.
  5. Handbook for Fire Control Instruments, 1914. p. 21.
  6. Handbook for Fire Control Instruments, 1914. p. 18.
  7. Handbook for Fire Control Instruments, 1914. p. 19.
  8. Handbook for Fire Control Instruments, 1914. p. 21.
  9. Annual Report of the Torpedo School, 1909. p. 148.
  10. Handbook for Fire Control Instruments, 1914. p. 21.
  11. Handbook for Fire Control Instruments, 1914. Plate 10.
  12. Annual Report of the Torpedo School, 1909. p. 148.
  13. Handbook for Fire Control Instruments, 1914. p. 21.
  14. Annual Report of the Torpedo School, 1910. Plate 60.
  15. Annual Report of the Torpedo School, 1910. p. 149.
  16. Handbook for Fire Control Instruments, 1914. p. 20.

Bibliography

  • H.M.S. Vernon. Annual Report of the Torpedo School, 1903, with Appendix (Wireless Telegraphy). Copy 478 at The National Archives. ADM 189/23.
  • H.M.S. Vernon. Annual Report of the Torpedo School, 1904, with Appendix (Wireless Telegraphy). Copy 237 at The National Archives. ADM 189/24.
  • H.M.S. Vernon. Annual Report of the Torpedo School, 1906, with Appendix (Wireless Telegraphy). Copy 46 at The National Archives. ADM 189/26.
  • H.M.S.O., London Torpedo Drill Book, 1905 (Corrected to December, 1904). Copy in Tony Lovell's library.
  • H.M.S.O., London Torpedo Drill Book, 1908 (Corrected to December, 1907). Copy in Tony Lovell's library.
  • H.M.S.O., London Torpedo Drill Book, 1912 (Corrected to April, 1912). Copy in Tony Lovell's library.
  • H.M.S.O., London (1914). Torpedo Drill Book, 1914 (Corrected to May 15) Copy in Tony Lovell's library.
  • Admiralty, Gunnery Branch (1910). Handbook for Fire Control Instruments, 1909. Copy No. 173 is Ja 345a at Admiralty Library, Portsmouth, United Kingdom.
  • Admiralty, Gunnery Branch (1914). Handbook for Fire Control Instruments, 1914. G. 01627/14. C.B. 1030. Copy 1235 at The National Archives. ADM 186/191.